SIMOPS conflicts are hard to spot in lists because the risk depends on location, like a lift over a live line or hot work near a vent. A permit list shows each job on its own line with a number, a description and a location field, and two jobs that are dangerous together can sit pages apart with nothing to connect them. The person reviewing has to hold a mental map of the site and cross check every new permit against everything else active, which works on a quiet day and breaks down during a turnaround when hundreds of permits are open.
When active work is shown in 3D, people can see when two jobs are close together in a way that a list of permits never shows. A crane lift planned over a pipe rack carrying hydrocarbons is obvious when the lift zone and the rack appear together on the model, and so is hot work on one deck directly below a vent on the deck above, which a flat list or even a 2D plot plan can hide. Vertical relationships matter a great deal on offshore platforms and in multi level process structures, where the dangerous neighbor is often above or below the job rather than beside it.
The system can also check for conflicts automatically, based on rules the site defines for which kinds of work cannot happen near each other. Typical rules cover hot work within a set distance of gas release points or breaking containment, confined space entry near activities that could affect the atmosphere inside and lifts over live equipment, with each rule defining the types of work involved and the separation required. The site sets the rules because acceptable separation depends on the process, the layout and the site’s own risk standards.
Interface flags these combinations before the work is approved, and seeing the conflict in 3D makes it much easier for the coordinator to decide how to sequence the two jobs. A flag on its own says that two jobs conflict, while the 3D view shows how close they are, what lies between them and whether one could be moved, delayed or made safe with additional controls such as a gas monitor or a fire watch. The decision stays with the coordinator, who knows the operational picture and can talk to both crews.
Rules need tuning over time, since rules that are too broad flag so many combinations that coordinators start dismissing them, while rules that are too narrow miss real conflicts. Looking back at the flags that were set aside, and the reasons given, is a practical way to see which rules need adjusting, and any near miss involving simultaneous work is a good prompt to check whether a rule should have caught it.
